Z370 aorus gaming 7-op.Z370 AORUS Gaming 7 (rev. 1.0)

 

Z370 aorus gaming 7-op

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Are you a human?.Are you a human?

 

MAX-COVERED COOLING. The Max-Covered cooling features 2x mm and 1x mm unique blade stack fans with wind claw design and alternate spinning, so the air pressure can completely cover the heatsink. The airflow is spilt by the triangular fan edge, and guided smoothly through the 3D stripe curve on the fan surface. Z AORUS Gaming 7 Unboxing Video * Product specifications and product appearance may differ from country to country. We recommend that you check with your local dealers for the specifications and appearance of the products available in your country. Colors of products may not be perfectly accurate due to variations caused by photographic. 4GB (1X4GB) Memory Ram Compatible with Gigabyte Z AORUS Gaming 3, Z AORUS Gaming 5, Z AORUS Gaming 7, Z Gaming 7-OP, Z AORUS Gaming K3, Z AORUS GAMING WIFI Motherboards By CMS C

 

Z370 aorus gaming 7-op.Z AORUS GAMING 7-OP (rev. ) Key Features | Motherboard – GIGABYTE Global

4GB (1X4GB) Memory Ram Compatible with Gigabyte Z AORUS Gaming 3, Z AORUS Gaming 5, Z AORUS Gaming 7, Z Gaming 7-OP, Z AORUS Gaming K3, Z AORUS GAMING WIFI Motherboards By CMS C The Z AORUS GAMING 7-OP is the first Intel Core i7+/i5+ enthusiast platform that supports built-in 32GB Intel Optane Memory. Optane fuels storage performance by acting as a cache drive giving users a significant boost compared to traditional mechanical drives. AORUS M.2 Thermal Guard. MAX-COVERED COOLING. The Max-Covered cooling features 2x mm and 1x mm unique blade stack fans with wind claw design and alternate spinning, so the air pressure can completely cover the heatsink. The airflow is spilt by the triangular fan edge, and guided smoothly through the 3D stripe curve on the fan surface.
 
 
related:
Z370 AORUS GAMING 7-OP (rev. 1.0)

Z AORUS GAMING 7-OP

Z AORUS GAMING 7-OP (rev. ) Support | Motherboard – GIGABYTE Global
Two-socket Socket 603 SI2P board from ABIT

ABIT announced the release of the SI2P dual-processor motherboard for servers / workstations on Socket 603 Intel Xeon chips (Prestonia)

It should be noted that there is some confusion in the presented specifications (the Athlon MP / MPX chipset and AGP Pro slot appeared from somewhere, probably these specs “got” here from the “neighboring” specifications of the dual-processor Athlon MPX WA2A board, which we wrote about earlier ). However, we still managed to figure it out: ABIT SI2P is based on the iE7500 (E7500 Plumas + ICH3-S) chipset, supports up to two Intel Xeon (Prestonia / Socket 603) processors with 400 MHz FSB, up to 12 GB of Registered ECC DDR SDRAM memory (six slots ), equipped with an integrated ATI Rage XL graphics adapter, two Gigabit Ethernet LAN controllers (Intel 82544GC), one 64-bit / 133 MHz PCI-X and three 64-bit / 100 MHz PCI-X slots, one 32-bit PCI, dual-channel Ultra 160 SCSI adapter (Adaptec AIC-7899W) supporting Adaptec Zero Channel SCSI RAID. So far, this is all information about ABIT SI2P.

Leave a Reply

Your email address will not be published. Required fields are marked *