Hauppauge wintv hvr-1800
Are you a human?.Are you a human?
Hauppauge WinTV HVR Tuner Card (PCI Ex) overview and full product specs on CNET. Jun 02, · Hauppauge is one of the leaders in the TV tuner market. Their latest HDTV tuner, the WinTV HVR, is a PCIe tuner that supports both digital and analog signals. In addition, it comes with a remote that works with Windows Media Center and IR Blasts. Join us, as we put it through our tests and see if the WinTV HVR can live up to its s: 1. The WinTV-HVR/ will work with Windows 7 or Windows Vista Media Center. Just use the driver provided on the Hauppauge WinTV-HVR Installation CD. Since the WinTV-HVR is dual tuner, you will be able to watch and record analog cable TV channels and ATSC digital TV channels at .
Hauppauge wintv hvr-1800.HAUPPAUGE WINTV-HVR QUICK INSTALLATION MANUAL Pdf Download | ManualsLib
WinTV-HVR/ WinTV-HVR WinTV-HVR Search for the support page of your Hauppauge product by product code. How to find the product code of your Hauppauge product: Hauppauge product codes on WinTV internal boards are normally found on the TV tuner. This is a five digit number normally followed by a revision (REV). Jun 02, · Hauppauge is one of the leaders in the TV tuner market. Their latest HDTV tuner, the WinTV HVR, is a PCIe tuner that supports both digital and analog signals. In addition, it comes with a remote that works with Windows Media Center and IR Blasts. Join us, as we put it through our tests and see if the WinTV HVR can live up to its s: 1. So as long as you use the same Hauppauge device, you can install the WinTV application on more than one computer. WinTV v This download is a complete WinTV v10 application, including Windows drivers for supported WinTV products plus utilities. WinTV-HVR WinTV-HVR, WinTV-HVR, WinTV-HVR WinTV digital TV receivers.
Support: WinTV-HVR-1850 and WinTV-HVR-1800
Note on new product installs:
Hauppauge WinTV HVR Tuner Card (PCI Ex) Specs – CNET
Hauppauge | Product Support
You can use WinTV v7 or WinTV v8 with the WinTV-HVR-1800/1850 board
Hauppauge Support | Product Selector
Intel E7500 Thunder Board i7500 by TYAN
As soon as the announcement of the new Intel Xeon (Prestonia) server processors and the i7500 chipset for it was announced, ready-made solutions for such systems began to appear. TYAN to launch its i7500-based board – Thunder i7500 (S2720).
So the specs. Thunder i7500 is made in SSI EEB v3 form factor.0 (12 x 13 inches) with MCH + ICH3 + P64H2 (two PCI-X slots) + FWH, supports up to two PGA603 ZIF Intel Xeon processors with 400 MHz FSB. The board is equipped with six 184-pin DDR DIMM sockets (dual-channel bus, up to 12 GB Registered DDR266 / DDR200, with ECC support), two 64-bit 133/100/66 MHz PCI-X slots, two 64-bit 66/33 MHz slots PCI-X and one 32-bit 33 MHz (5V) PCI slot, integrated graphics (ATI RAGE XL, 4 MB, up to 8 MB), integrated dual-channel IDE controller (up to 4 ATA-100/66/33 IDE / ATAPI devices), an integrated SCSI controller (Adaptec AIC-7899W / AIC-7902, dual-channel Ultra160 / Ultra320 on 66 MHz PCI-X bus, up to 15 LVD SCSI devices per channel, support for Adaptec Zero-Channel RAID), two integrated Gigabit / Fast Ethernet LAN controller (Intel 82554GC, 10/100/1000 and Intel 82550, 10/100, Gigabit NIC on 66 MHz PCI-X bus).
The board is equipped with all kinds of hardware monitoring tools, supports IPMI, I?C, IPMB and equipped with BMC (Q-Logic Zircon).